Juki MOL 254 Automatic Belt Loop Attaching Sewing Machine

October 26, 2026 admin 0 Comments

Juki MOL 254 Automatic Belt Loop Attaching Sewing Machine Automatic 2-needle Belt-loop Attaching Machine Serviced by Tomsewing

Juki MOL 254 Automatic Belt Loop Attaching Sewing Machine time is 1.2 seconds per belt-loop, which ensures increased productivity. The feed mechanism incorporates a computer-controlled X-Y method to allow the operator to change the number of stitches and sewing sizes.

The number of stitches and size of bartacking

The number of stitches to sew a belt-loop between; 28-, 36- and 42-stitches, and the bartacking size easily changed through the operating panel. What’s more, can create own original sewing patterns in addition to the standard ones using JUKI’s PGM-20 programming software developed for computer-controlled sewing machines.

The changeover of cutting method between cross cutting and straight cutting

The applicable loop width for the cross-cutting device is increased. In this model, both the cross-cutting device and the straight-cutting device can now cut loop up to 20mm width.

Juki MOL 254 Automatic Belt Loop Attaching Sewing Machine Automatic time is 1.2 seconds per belt-loop (with 28 stitches)

Juki MOL 254 Automatic Belt Loop Attaching Sewing Machine head specifically developed for belt-loop attaching machines runs at a maximum sewing speed of 2,500rpm with a direct-drive system that improves start up performance and shortens sewing time. The belt-loop feeding device is now provided with a halfway standby capability for subsequent belt-loops, and its faster belt-loop supply action shortens the time required for supplying belt-loops and helps speed up the machine time to 1.2 seconds per belt-loop (with 28 stitches).

With the improved consistency in belt-loop supply action and re-try capability, the machine down time reducs substantially

Belt-loops are fed out by the conventional gear-roller feeding mechanism and also drawn out by the new drawing mechanism on the clamp device. Supported by these two mechanisms, the folding fork catches “curled” or “creased” belt-loops every time and supplies them to the head. In addition, the sensor of the clamp device detects the presence/absence of belt-loops. If it detects a faulty belt-loop feed, the clamp device automatically repeats the clamping action.

Juki MOL 254 Automatic Belt Loop Attaching Sewing Machine

Options to include Belt-loop tension releasing device, belt-loop feeding device, air gun, needle cooler, needle thread breakage detector.

Model Name	MOL-254
Max. sewing speed	2,500sti/min
Number of stitches	28, 36, 42 (selectable on the operating panel)
Needle gauge	40~70mm (1-37/64″~2-3/4″)
Bartacking length	7~22mm (9/32″~55/64″) (adjustable in increments of 0.1mm)
Bartacking width	1~3.2mm (3/64″~1/8″) (adjustable in increments of 0.1mm)
Belt-loop width	9~20mm (23/64″~25/32″)
Finished length of belt-loop	48~78mm (1-57/64″~3-5/64″)
Needle	438 (Nm70), DP×5 (#10)